Q: Does "3000" mean it will lift 3000 pounds?
No, the model number of our hoist refers to the maximum amount of torque that it can output, not weight capacity. Because our products can be rigged in multiple ways on lifts, it is impossible for us to label them in terms of weight capacity. The pipe/cable winder surface where the cable wraps up as well as how the lift cable is rigged for mechanical advantage (block & tackle) both affect speed and torque by considerable margins. Lift manufacturers use these specifications to determine how much torque is being applied to each gear drive based on what overall weight capacity they aim to lift, allowing them to select the appropriate size product from us.
Q: Can I use a 3450 RPM motor?
No, the gears on the AMS Series are specifically designed to be powered by a 1725 RPM motor. Using a faster motor will void the warranty and could lead to accelerated wear and/or catastrophic failure of the lift.
Q: Can I rotate the gearbox sideways?
Yes, the AMS Direct Drives can be mounted with the motor at the top or rotated 90 degrees either direction. Do not mount with the motor at the bottom. Ensure the motor capacitor is always at the 12 o'clock position regardless of gear drive orientation.
Q: Is there a DC option for the EBD?
There are 56 frame DC motors and controls available that will mount to the AMS Gear Drives. Contact us for more details.
Q: Is there a remote control option?
Yes, the motor on the AMS line is compatible with most boat lift remote controls and the reversing switch can be upgraded to a GEM remote control for an additional fee.
